Because it can give the impression of luxury and classics, wood floors are currently being increasingly chosen to complement the interior design of the house learn more here. The wood material used as a floor is also increasingly diverse, ranging from teak, and others. Even so, the treatment of wood floors is certainly different from other types of floors such as ceramic or marble. Because wood is prone to mouldy and eroded, there are things you should avoid when cleaning this type of floor. Well, for maximum care, use our north shore tile cleaning service. Know how to clean wood floors properly by avoiding the following.
1. Using too much water
Hardwood floors are more easily mouldy and weathered when compared with other types of floors. Using too much water when cleaning this type of floor will cause mould to grow more easily. You are not prohibited from mopping the wooden floor with water, but make sure the mop has been squeezed maximally before it is added to the floor. By doing so, the risk of lagging which can make porous wood can be minimized. Also, make sure you dry the wood floor thoroughly after mopping it.
2. Clean with Vinegar or Ammonia
Vinegar or ammonia solution is widely used to clean very dirty surfaces. This is because the acidic solution in vinegar can effectively dissolve dirt and make cleaning activities easier. Even so, you should avoid using vinegar or ammonia as a wood floor cleaner. Because these two materials can erode the finishing and wood texture. If finishing eroded, after a long time will cause wood to become porous.
3. Pouring Cleaning Liquid Directly onto the Floor Surface
Pouring wood floor cleaning liquid directly will also cause the wood to finish to erode. Liquid scars will be seen clearly and cause the colour of the wood to fade. When you want to use cleaning fluid, you should dissolve it first using water, then wipe it on the floor with a clean cloth or chamois. Wipe one way so as not to damage the surface of the wood.
4. Using a Stubby Sweep or Stiff Fluffy Broom
Using a sticky broomstick or broom with stiff hair will cause the wood floor to be scratched and make the appearance change. Not infrequently, you even have to do the finishing again to restore the condition of the wooden floor that has been scratched. This certainly requires no small cost. For that, you should always use the type of fibres broom with broom hair that is limp to clean the surface of the wooden floor.
5. Leave Spills or Stains for a Long Time
When the wood floor is exposed to liquid dirt, for example from food or drink, clean it as soon as possible so as not to cause spotting and trigger mould growth. Wipe spills or stains with a wet cloth that has been wrung, then dry with a dry cloth or hair dryer until there are no stains and spills left. Spill stains that are not cleaned up immediately can also provoke the presence of insects and termites that can weather the wooden floors.
6. Mop Using Steam Mop
For practical reasons, a steam mop is increasingly being used to mop the floors, especially in modern homes. However, the use of steam mop on wooden floors is not recommended because it will make the floor damaged and dry. Over time, this can cause erosion. A steam mop can also damage the surface of the wood and make it peeled off.
7. Clean the Wood Floor with Soap
Care of wood floors can not be confused with the types of ceramic floors. If you can clean a ceramic floor with soap, then don’t do it on a wooden floor. The nature of the soap base will cause the wood composition to change and soften the wood. Former soap can also be absorbed into the sidelines of wood, and it makes it easier to moss, mould, or be eaten by termites.
Ultra Brite Carpet & Tile Cleaning North Shore
79-83 Longueville Road, Lane Cove NSW 2066
(02) 8015 5143